How to measure and install a fabric roller blind

No complicated calculations, no need to call a technician—you can do it yourself, easily and stress-free. All you need is a measuring tape, a level, four screws, and a drill.

Measuring? Easier than you think.

You can install your blind in two ways - depending on what suits your space best:

ENG Jak zaměřit a nainstalovat roletu

Inside the Window Recess: A clean and elegant solution that visually enlarges the space. The blind fits directly within the window recess.

Outside the Window Recess: Provides better coverage thanks to a wider overlap. Ideal for maximum shading or when you want to cover the entire window frame.

Our step-by-step guide will walk you through every step - from accurate measuring to final adjustments. We’ll also share practical tips to save you time and help you avoid common mistakes.

View measuring guide

Easy installation - no technician needed

Your blinds arrive fully assembled and ready to install. Thanks to our smart ZOOMTECH® technology, we use the same metal brackets for all sizes - so even if you have multiple blinds, the whole space will look clean and cohesive. A full step-by-step installation guide is available in our detailed manual.

View installation guide

What you'll need:

  • Drill with appropriate bit
  • 4 screws (we recommend 3.5 mm diameter)
  • Spirit level or laser level
  • A few minutes of your time

Installation steps:

  • Mark the four drilling points according to the instructions
  • Fix the metal brackets in place
  • Click the blind into the brackets (no complicated assembly)
  • Cover the brackets with the design covers—and you’re done!

Need Help?

Not sure about measuring? Unsure which installation method to choose? We’re here to help - just get in touch.

Tip: If you have an unusual window or specific requirements, send us a photo and we’ll recommend the best solution tailored to your space.

No entries found...